Leaking Tap Repairs Wantirna
A drip that keeps you awake, a mixer that leaks around the handle or a tap that takes all your strength to turn off? We repair and replace taps across Wantirna. Ring 03 9069 5874.
- Licensed and insured
- Local to Wantirna 3152
- Quote agreed first
- After-hours call-outs

Why fix a dripping tap?
A dripping tap is easy to ignore, but it wastes a surprising amount of water over a year, and if it is a hot tap, you are paying for electricity to warm water nobody uses. A drip also tends to get worse, as water cutting across a worn seat erodes it further. And a tap that needs to be forced off to stop dripping wears out faster still.
The two kinds of tap in Wantirna homes
Most homes in Wantirna have a mix of tap types, depending on when kitchens and bathrooms were last updated.
Traditional washer taps
Plenty of untouched 1970s and 1980s bathrooms and laundries in the suburb still use a pair of pillar or wall taps, each with a jumper valve and rubber washer. Turning the handle screws the spindle down and squeezes the washer against a brass seat, which is what shuts the flow off. Over time, the washer hardens, splits or wears, and the seat can become pitted. Our guide to water bill spikes and hidden leaks shows how quickly small drips add up.
Repairs usually involve replacing the washer and jumper valve, re-facing the seat if it is worn, and replacing the O-rings on the spindle if the tap leaks around the handle. In some cases, replacing the tap body or the whole tap set is better value, particularly if the tap is corroded or no longer made.
Mixer taps
Single-lever mixer taps, now common in kitchens and renovated bathrooms, use a ceramic cartridge instead of a washer. The cartridge contains two ceramic discs that slide over each other to control flow and temperature. When a cartridge fails, the tap may drip, leak around the base or handle, become stiff, or have trouble mixing the temperature.
The fix is usually a replacement cartridge. Cartridges are specific to the brand and model, so we identify the tap and source the correct part. Some cheaper mixers have cartridges that are hard to find, and in that case replacing the tap can be more practical.
How do I fix a tap that is leaking from the top?
If water is leaking from around the handle or spindle rather than from the spout, the seal around the spindle has failed. On a washer tap, that is usually the O-rings on the spindle or the gland packing in older taps. Turn off the water at the isolation valve or meter, remove the handle and cover, unscrew the spindle and replace the O-rings, then reassemble. On a mixer, leaking from the top or around the lever usually means the cartridge or its seals are worn, and the cartridge needs replacing. If you are not confident, or the parts are seized, we can do it for you.
How can I stop my tap from leaking water?
In the short term, close the tap firmly but without forcing it, and if the drip is bad, turn off the isolation valve under the sink or basin if there is one. The real fix is to replace the worn part: a washer and seat for a traditional tap, or a cartridge for a mixer. Forcing a worn tap harder to stop the drip damages the seat and makes the repair bigger.
Other tap problems we fix
- Outdoor garden taps that drip, leak from the spindle or have cracked in the wall.
- Shower taps leaking behind the wall, which can cause water damage to framing and the room behind.
- Laundry taps and washing machine taps that have seized or leak.
- Low flow from a single tap, often due to a blocked aerator or a partly closed isolation valve.
- Noisy taps that shudder or hammer when turned on or off, often due to a loose jumper valve or high water pressure.
- New tap installation when you want to upgrade a kitchen mixer or replace old bathroom taps.
Tap replacement
If a tap is worn out, corroded or you simply want a change, we supply and fit new taps or install ones you have chosen. All taps we install are WaterMark certified, as required in Australia. When replacing old separate taps with a mixer in a bathroom or kitchen, the wall or bench may need adjusting, and we explain what is involved before we start.
How much will a plumber charge to fix a leaking tap?
We do not publish a set price, because a washer change on one tap and a set of bathroom taps with seized spindles and worn seats are very different jobs. When you call, tell us how many taps, what type they are and where they are, and we can explain what is likely to be involved. If you have several small jobs, such as a dripping tap, a running toilet and a leaking shower, it makes sense to have them done in the same visit.
Leaking tap repairs around Wantirna
We repair taps in Wantirna 3152 and nearby, including Wantirna South, Bayswater, Vermont, Vermont South, Knoxfield and Heathmont. If you also have a running toilet, see toilet repairs.
What comes with leaking tap repairs
- Equipment
- Drain camera and locator, high-pressure jetter, electric drain machine, acoustic leak detector, thermal camera, pressure gauges
- Licences
- Victorian plumbing licences for water supply, sanitary, drainage and roofing
- Pricing
- The cause explained and the price agreed before work; written quotes for bigger jobs
- Materials
- WaterMark-certified fittings and products that meet Australian Standards
- Paperwork
- Compliance certificates for regulated work, plus photos for your records or insurer
- Clean-up
- Old parts taken away, the work area cleaned, and the repair tested with you
Leaking Tap Repairs in Wantirna: your questions
How do I fix a tap that is leaking from the top?
Leaking around the handle means the spindle seal has failed. On a washer tap, replace the O-rings on the spindle; on a mixer, replace the cartridge. Turn the water off first. If parts are seized, call a plumber.
How can I stop my tap from leaking water?
Close it firmly without forcing it and turn off the isolation valve if the drip is bad. The lasting fix is replacing the worn washer and seat, or the mixer cartridge.
How much will a plumber charge to fix a leaking tap?
It depends on the tap type, how many taps and what parts are worn. We explain what is involved when you call and give you the price before we start.
How much does it cost for a plumber to replace a leaking tap?
The cost depends on the tap you choose and what changes are needed to fit it. We quote the supply and installation before the work starts.
Should I repair or replace an old tap?
If the tap body is sound and parts are available, a repair is usually fine. If it is corroded, seized or the parts are no longer made, replacing it is often better value.
Why does my tap still drip after I changed the washer?
The seat inside the tap may be worn or pitted, so the new washer cannot seal. The seat needs re-facing, or the tap body needs replacing.
Before you call, read this
Tell us what needs fixing
Tell us about the job and a licensed Wantirna plumber will ring you back. If water is flooding or a sewer is overflowing, do not wait for a reply: call 03 9069 5874 now.
Every job is priced on what we find on the day, so there is no price list here. You will always know the cost before we start.
From your call to a finished repair
Four steps, the same on every job, whether it is a dripping tap or a sewer overflowing at midnight.
- 01You call or send the form
Say what is going on and roughly where on the property. If you can, snap a photo of the leak, the tap or the label on the hot water unit so the right parts come in the ute.
- 02We find the cause
On site we trace the fault, show you what we found and explain the options. You get the price before any fitting is undone.
- 03The repair, tested
Work is done to the Plumbing Regulations and Australian Standards, then run and tested while you watch. Regulated jobs come with a compliance certificate.
- 04Tidy finish and a follow-up
Old parts go in the ute, the work area is wiped down, and we check in a few days later to make sure everything is still dry and working.
Other plumbing jobs we take on in Wantirna
Where we work around Wantirna
Home base is Wantirna, between the Dandenong Creek parklands and Knox City. From here it is a short run to Wantirna South over High Street Road and Scoresby beyond it, Bayswater and Boronia to the east, Vermont South and Vermont over the Whitehorse line, Knoxfield down Stud Road and Heathmont across the creek to the north. Not on the list? Ring 03 9069 5874 and ask.
Need a plumber in Wantirna?
A licensed local plumber picks up, and the cost is settled before any tools come out.