Burst Pipe Repairs Wantirna
Water spraying under the house, a wall that is suddenly wet or a soggy patch in the lawn that never dries? We find and repair burst and leaking water pipes across Wantirna. Ring 03 9069 5874.
- Licensed and insured
- Local to Wantirna 3152
- Quote agreed first
- After-hours call-outs

What should I do if my water pipe burst?
Act fast to limit the damage:
- Turn off the water at the meter. Turn the meter tap clockwise until it stops. If you do not know where it is, our guide to finding your water meter will help.
- Turn off the hot water at the switchboard if the leak is on a hot pipe or near the cylinder.
- Stay clear of electrics. Never touch wet power points, light switches or the switchboard.
- Open a low tap outside to drain remaining water from the pipes.
- Move belongings and soak up what you can.
- Take photos for your insurer.
- Call a licensed plumber.
For burst pipes causing damage, we treat the call as an emergency. See our emergency plumber page.
Why pipes burst in Wantirna homes
Most of Wantirna's housing went up in the 1970s and early 1980s. That means a lot of the water pipes are now forty years old or more, and many have been patched, extended or partly replaced along the way.
What plumbing pipes do they put in houses in Australia?
Over the decades, Australian homes have used several materials for water supply:
- Copper has been the standard for decades and is what most 1970s and 1980s Wantirna homes have inside. It lasts well but can split at kinks, wear through where it rubs against brick or timber, and fail at joints.
- Galvanised steel was used in older homes and for some underground services. It rusts from the inside, reducing flow and eventually leaking.
- Polybutylene was used in some homes in the 1980s and 1990s and can become brittle with age and chlorine exposure.
- Polyethylene (poly) is commonly used for underground water services and is durable but can be damaged by digging or roots.
- Cross-linked polyethylene (PEX) is now common in new homes and renovations.
Burst pipes we commonly repair here include:
- Split copper under the floor, often where a pipe was bent too tightly or has been rubbing on a joist for decades.
- Failed joints where a fitting has corroded or the solder has failed.
- Pinhole leaks in copper caused by internal corrosion, often in hot water lines.
- Underground service pipes cracked by tree roots, soil movement in reactive clay or garden works.
- Flexible braided hoses under sinks, basins and toilets that have rusted or burst. These are a very common cause of sudden indoor flooding.
- Pipes damaged by high water pressure or water hammer.
How we find and repair burst pipes
Locating the leak
Sometimes a burst is obvious: water spraying under the house or pooling in the garden. Other times, the only sign is a damp wall, a stained ceiling or a water bill that has jumped. For hidden leaks, we use acoustic and thermal leak detection equipment to pinpoint the problem before cutting into walls or digging. See leak detection.
Repairing the pipe
For a single split or failed joint, we cut out the damaged section and replace it with new pipe and fittings, then pressure test the line to make sure it is sound. For leaks in walls, we keep the opening as small as practical. For underground leaks, we excavate carefully around the break and repair it.
If the pipe is failing in several places, or is made of galvanised steel or old polybutylene, a series of patches is likely to be throwing good money after bad. In that case, we recommend replacing the section or the whole service and explain the options and costs.
After the repair
We pressure test, check for any further leaks and restore water. If the burst was caused by high water pressure, we test the mains pressure and fit or replace a pressure limiting valve to protect the rest of your plumbing. See water pressure.
How much to replace a burst water pipe?
There is no flat rate, because the cost depends on where the pipe is, how easy it is to reach and how much needs replacing. A burst flexible hose under a basin is a quick fix. A leak in a copper line inside a wall, or an underground service under a driveway, takes longer. We explain the likely approach on the phone, and once we have found the burst, we give you a firm price before the repair.
Preventing burst pipes
- Check flexible hoses under sinks, basins, toilets and the washing machine. Replace them if you see rust, fraying or bulges, and every eight to ten years anyway.
- Test your water pressure. High pressure strains every pipe and fitting. A pressure limiting valve protects them.
- Insulate exposed pipes on the south side of the house, where they can get cold in winter.
- Know where the meter is and make sure the tap turns.
- Watch the water bill. An unexplained jump can mean a hidden leak. Our guide on water bill spikes explains how to test your meter.
Burst pipe repairs near Wantirna
We repair burst pipes throughout Wantirna 3152 and in Wantirna South, Bayswater, Boronia, Vermont South, Knoxfield, Scoresby and Heathmont.
What comes with burst pipe repairs
- Equipment
- Drain camera and locator, high-pressure jetter, electric drain machine, acoustic leak detector, thermal camera, pressure gauges
- Licences
- Victorian plumbing licences for water supply, sanitary, drainage and roofing
- Pricing
- The cause explained and the price agreed before work; written quotes for bigger jobs
- Materials
- WaterMark-certified fittings and products that meet Australian Standards
- Paperwork
- Compliance certificates for regulated work, plus photos for your records or insurer
- Clean-up
- Old parts taken away, the work area cleaned, and the repair tested with you
Burst Pipe Repairs in Wantirna: your questions
What should I do if my water pipe burst?
Turn off the water at the meter, switch off the hot water at the switchboard if hot pipes are involved, keep away from wet electrics, drain the pipes at an outside tap, move belongings and take photos. Then call a licensed plumber.
How much to replace a burst water pipe?
It depends on where the pipe is, how accessible it is and how much needs replacing, so we quote each job once we have found the burst. You get the price before any repair starts.
What plumbing pipes do they put in houses in Australia?
Copper has long been the standard for water supply. Older homes may have galvanised steel, some 1980s and 1990s homes have polybutylene, underground services are often polyethylene, and many new homes use cross-linked polyethylene.
Can you fix a burst pipe without cutting into the wall?
We use acoustic and thermal leak detection to pinpoint the leak so any opening is as small as possible. Sometimes the pipe can be accessed from under the floor or the roof space instead.
Will insurance cover a burst pipe?
Many policies cover the sudden water damage, though not usually the worn pipe itself. Check your policy. We can supply photos and a written report.
Why did my pipe burst?
Common causes include age and corrosion, high water pressure, pipes rubbing against the structure, ground movement, roots and failed flexible hoses.
Before you call, read this
Tell us what needs fixing
Tell us about the job and a licensed Wantirna plumber will ring you back. If water is flooding or a sewer is overflowing, do not wait for a reply: call 03 9069 5874 now.
Every job is priced on what we find on the day, so there is no price list here. You will always know the cost before we start.
From your call to a finished repair
Four steps, the same on every job, whether it is a dripping tap or a sewer overflowing at midnight.
- 01You call or send the form
Say what is going on and roughly where on the property. If you can, snap a photo of the leak, the tap or the label on the hot water unit so the right parts come in the ute.
- 02We find the cause
On site we trace the fault, show you what we found and explain the options. You get the price before any fitting is undone.
- 03The repair, tested
Work is done to the Plumbing Regulations and Australian Standards, then run and tested while you watch. Regulated jobs come with a compliance certificate.
- 04Tidy finish and a follow-up
Old parts go in the ute, the work area is wiped down, and we check in a few days later to make sure everything is still dry and working.
Other plumbing jobs we take on in Wantirna
Where we work around Wantirna
Home base is Wantirna, between the Dandenong Creek parklands and Knox City. From here it is a short run to Wantirna South over High Street Road and Scoresby beyond it, Bayswater and Boronia to the east, Vermont South and Vermont over the Whitehorse line, Knoxfield down Stud Road and Heathmont across the creek to the north. Not on the list? Ring 03 9069 5874 and ask.
Need a plumber in Wantirna?
A licensed local plumber picks up, and the cost is settled before any tools come out.